Coronado Stone veneer can be applied to any structurally sound surface. No foundation or structural changes are necessary, as Coronado Stone veneer becomes an integral part of the surface to which it is attached
Surface Preparation:
(over wood, painted stucco, foam, or metal)
Cover entire surface with 3.4 expanded metal lath, overlap the joints approximately 2" using 1½-2" roofing nails or screws depending on surface. Over wood surface, nails or screws should be 6" apart in every direction. Over plaster board or painted surface or stucco, nails or screws should be kept 16" on center, penetrating the studs, and 6" apart. Keep lath tight.
NOTE: Waterproof paper should be used over an exterior wood surface before installing lath
Check recommended product application prior to starting.
(over wood, painted stucco, foam, or metal)
Cover entire surface with 3.4 expanded metal lath, overlap the joints approximately 2" using 1½-2" roofing nails or screws depending on surface. Over wood surface, nails or screws should be 6" apart in every direction. Over plaster board or painted surface or stucco, nails or screws should be kept 16" on center, penetrating the studs, and 6" apart. Keep lath tight.
NOTE: Waterproof paper should be used over an exterior wood surface before installing lath
Check recommended product application prior to starting.